Caractéristiques et avantages

Saft Urja KPL, KPM, KPH nickel batteries offer a wide range of low, medium and high discharge rates and capacities. They boast a flexible solution for all types of industrial applications. KPL, KPM, KPH vented pocket plate nickel batteries are IEC 60623 and IS 10918 certified and available in translucent polypropylene cases.

Spécifications techniques

Saft Urja - KPL - Long rate performance

11 Ah – 1550 Ah

KPL has the thickest plate and is designed for applications where the battery must provide:

• Reliable energy over long discharge period
• A current that is relatively low in comparison with the total stored energy
• Infrequent discharges

KPL is typically used in power back-up and bulk energy storage applications. KPL cell has thick plates to provide a large capacity reserve for long duration discharge such as emergency lighting, alarms, railway signalling, DC instrumentation and photovoltaic system.

Saft Urja - KPM - Medium rate performance

10 Ah – 1365 Ah

KPM is designed for applications where the batteries must sustain:

• Demanding typical backup time between 30 minutes and 3 hours between 30 minutes and 3 hours
• “Mixed” loads which involve high and low discharge rates
• Frequent or infrequent discharges

KPM type is typically used in power back-up applications such as transmission & distribution substations for switchgear applications.

Saft Urja - KPH - High rate performance

8 Ah – 1012 Ah

KPH uses very thin plates and is designed for applications demanding:

• A relatively high current over short periods usually less than 1-hour duration
• Usually less than 1 hour duration
• Frequent or infrequent discharges

KPH type is typically used in engine starting and power plant emergency back-up applications.