2012-02-10 17:35:00
23.49€ -0.89 %

print

Home > Technologies > Lithium > Li-ion > MP cell range


Lithium-ion (Li-ion) - MP cell range

Rechargeable battery
Download literature
Saft MP prismatic rechargeable cells are based on lithium-ion chemistry. In addition to unrivalled nominal capacities, and long cycle-life, their most innovative feature is the capability to be charged and discharged over a wide temperature range, especially at low temperatures.
 
The MP cells feature various redundant safety features (electronic protection circuit, built-in circuit breaker in case of a charger fault, safety valve, shut down separator) which makes them ideal for demanding applications (military, medical, etc.).
 

 

Battery assemblies

To maximize performance and ensure total safety, Saft and its certified pack makers integrate MP cells into battery assemblies designed to the specific requirements of each application.

 

Construction features

  • stainless steel or aluminium container
  • hermetic and sturdy glass-to-metal sealing
  • built-in circuit breaker and safety vent
  • shutdown separator (operating at temperatures > 125°C)
  • available as individual batteries or multi-cell battery packs

Main applications  

  • military radiocommunication
  • mobile asset tracking
  • small UPS
  • portable medical defibrillators
  • professional portable lighting (miners caps lamps, etc.)
  • portable gas detection
  • gas tank level monitoring
  • electric bikes and personal mobility
  • bar code reading systems
  • Robotics
  • AUV’s
 

Benefits

  • high operating voltage (4.2-2.5 V range)
  • high energy density (up to 385 Wh/l and 180 Wh/kg)
  • wide operating temperature range (-20°C to +60°C for charge, -50°C to +60°C for discharge)
  • unrivalled low temperature performance
  • high current capability (2C rate in continuous mode; up to 4C rate in pulses)
  • extended autonomy
  • long cycle-life (600 to 1000+ cycles), depending on conditions
  • high current capability (2C rate in continuous mode; up to 4C rate in pulses)
  • easy state of charge detection based on open circuit voltage readings
  • light weight
  • easy integration into compact systems
  • Compliance with the European directive RoHS
  • excellent safety records
 
Download literature
  • Data sheet
  • Market brochures
  • Transport certificates
  • MSDS
  • User Manual
Technical characteristics

 

  • Operating voltage typically above 3.5 V
  • 4.2 V end of charge voltage
  • UL recognized cells
  • Some cell and battery pack models are non-restricted for transport

 

Dimensions  MP 144350 MP 174565 Integration MP 176065 Integration
Thickness (1) 14.9 mm max. 19.7 mm max. 20.3 mm max.
Width 43.9 mm max. 45.5 mm max. 60.5 mm max.
Height 54.5 mm max. 70 mm max. 70 mm max.
Typical weight (2) 68 grams 103 grams 143 grams
Nominal Voltage (3) 3.75 V 3.75 V 3.75 V
Rated Capacity (4) 2.6 Ah 4.8 Ah 6.8 Ah
       

(1) after 600 cycles
(2) including protection circuit
(3) C/2 current drain, +20°C, at mid-discharge
(4) uncycled cell charged at C/2 rate up to 4.2 V, followed by 1 to 4 hours of rest at +20°C, and discharged at +20°C at a constant rate of C/5, down to 2.5 V

Maximum discharge current

Up to 2C continuous in the 0/+60°C range. Up to C/5 in the -50/0°C range.
Up to 4C in pulse conditions (consult Saft for specific conditions)
Standard electronic protection circuits with a single cell are rated to 5A or 10A (other ratings on request).

Charge method

Constant current / Constant voltage (CCCV)

Charging Current 

Up to 1 C-rate

Operating temperature ranges

Charge : -20 / +60°C
Discharge : -50 / +60°C

Transport assignment 

MP 144350 and MP 174565 Integration are Non-restricted for transport as long as the battery pack nominal energy do not exceed 100 Wh
MP 176065 Integration Single cell and multi cell batteries are restricted (Class 9 assignment)

Data in this page is subject to change without notice and becomes contractual only after written confirmation by Saft.