2013-05-24 17:35:00
18.04€ -3.68 %


Home > Technologies > Nickel > Ni-Cd > VRE - Standard series


Nickel-Cadmium (Ni-Cd) : VRE - Standard series

Rechargeable battery

Download literature
Stockcheck
Click here to check this product's inventory (North america only)

Saft VRE Ni-Cd batteries were designed originally for cycling applications requiring a rapid charge. However, they are also suited to a wide range of general applications where they offer an excellent cost/performance ratio. The high level of reliability provided by Saft’s standard series Ni-Cd batteries is time-tested and well-proven, with hundreds of millions of units delivered over the years.

 

Main applications

  • medical equipment (homecare ventilators, respirators, cardiac defibrillators, …)
  • personal care (razors…)
  • professional lighting (torches & lamps, flashlights…)
  • radio communication and tracking equipment (portable radio communication, private mobile radio, …)
  • professional tooling (construction, agricultural tools, vacuum cleaners, …)
  • military equipment
  • professional electronic devices (handheld terminals, payment terminals, …)

 

Benefits

  • high power
  • excellent cycling performance
  • wide range of chargeability
  • excellent storage capability
  • zero maintenance

 

Download literature
  • Data sheet
  • Handbook
  • MSDS
Technical characteristics


Nominal voltage : 1.2 Volt / cell 

  VRE AA 700 VRE Cs 1600 VRE Cs 1800 VRE C VRE 1/2 D
Size AA Cs Cs C 1/2 D
IEC Capacity at 0.2 rate Typical (mAh) 780 1600 1800 2500 2550
Minimum (mAh) 700 1500 1700 2300 2400
Standard charge Current (mA) 70 150 170 230 240
Time (h) 16 16 16 16 16
Quick or fast charge Current (mA) 700 1500 1700 2300 800
Time (h) 1 1 1 1 2~3
Internal impedance (mOhm) 14 5 5 5 10
Diameter (mm) 14.0 22.2 22.2 25.3 32.2
Height (mm) 49.3 42.2 42.2 49.5 36.6
Approx weight (g) 21 48 49 75 80
           

 

  VRE D VRE 5500 D VRE F    
Size D D F    
IEC Capacity at 0.2 rate Typical (mAh) 5100 5500 8800    
Minimum (mAh) 4500 5000 8000    
Standard charge Current (mA) 450 500 800    
Time (h) 16 16 16    
Quick or fast charge Current (mA) 4500 5000 8000    
Time (h) 1 1 1    
Internal impedance (mOhm) 4 4 4    
Diameter (mm) 32.2 32.2 32.2    
Height (mm) 58.6 58.6 89.2    
Approx weight (g) 140 150 220    
           

* Also available with a high top. Diameter is similar. The projection of the top is 1.7 ± 0.2 mm, the flat area diameter is 4.0 mm, and the total height of the cell is 49.9±0.3 mm.

Note: Specifications are subject to modification without notice for further improvement.

Data in this page is subject to change without notice and becomes contractual only after written confirmation by Saft.