- Operating voltage typically above 3.5 V
- 4.2 V end of charge voltage
- UL recognized cells
- Some cell and battery pack models are non-restricted for transport
| Dimensions |
MP 144350 |
MP 174565 Integration |
MP 176065 Integration |
| Thickness (1) |
14.9 mm max. |
19.7 mm max. |
20.3 mm max. |
| Width |
43.9 mm max. |
45.5 mm max. |
60.5 mm max. |
| Height |
54.5 mm max. |
70 mm max. |
70 mm max. |
| Typical weight (2) |
68 grams |
103 grams |
143 grams |
| Nominal Voltage (3) |
3.75 V |
3.75 V |
3.75 V |
| Rated Capacity (4) |
2.6 Ah |
4.8 Ah |
6.8 Ah |
| |
|
|
|
(1) after 600 cycles
(2) including protection circuit
(3) C/2 current drain, +20°C, at mid-discharge
(4) uncycled cell charged at C/2 rate up to 4.2 V, followed by 1 to 4 hours of rest at +20°C, and discharged at +20°C at a constant rate of C/5, down to 2.5 V
Maximum discharge current
Up to 2C continuous in the 0/+60°C range. Up to C/5 in the -50/0°C range.
Up to 4C in pulse conditions (consult Saft for specific conditions)
Standard electronic protection circuits with a single cell are rated to 5A or 10A (other ratings on request).
Charge method
Constant current / Constant voltage (CCCV)
Charging Current
Up to 1 C-rate
Operating temperature ranges
Charge : -20 / +60°C
Discharge : -50 / +60°C
Transport assignment
MP 144350 and MP 174565 Integration are Non-restricted for transport as long as the battery pack nominal energy do not exceed 100 Wh
MP 176065 Integration Single cell and multi cell batteries are restricted (Class 9 assignment)